Questa è una vecchia versione del documento!
Basic analog design tutorials
[ Home ] [ VLSI Design WorkBook ] [ Back to index ]
Contents
- Introduction
- Tutorial 1 - Basic NMOS characteristics
- Tutorial 2 - Common-source amplifier
- Tutorial 3 - The CMOS inverter
- Tutorial 4 - A two stage OPAMP with Miller compensation
- Tutorial 5 - …
Keywords:
Introduction
Completely technology-independent tutorials, importing simple SPICE transistor models that you can find on Web and in textbooks
Basic NMOS and PMOS characteristics
Step-by-step tutorial
this is a PDK-independent tutorial ( using a standard transistor-model! )
click here This tutorial has been prepared by Luca Pacher.
Similar tutorials using Cadence can be found at:
http://cmosedu.com/videos/cadence/tutorial2/cadence_tutorial_2.htm (from CMOSedu.com)
http://eda.engineering.wustl.edu/wiki/index.php/Tutorials:Cadence:CreatingSchematicTransistorIV (from eda.engineering.wustl.edu)
http://vlsi.engr.uidaho.edu/#idaho-cadence (video tutorial, look at Cadence MOSFET Characterization)
Common-source amplifier
Creating symbols for your schematics
Un semplice esercizio, crere un ideal OPAMP using a voltage controlled voltage source (vcvs)
click here
The CMOS inverter
click here
Similar tutorials using Cadence can be found at:
http://cmosedu.com/videos/cadence/tutorial3/cadence_tutorial_3.htm from cmosedu.com (by J. Baker)
http://eda.engineering.wustl.edu/wiki/index.php/Tutorials:Cadence:CreatingSchematicInverter from eda.engineering.wustl.edu
A two stage OPAMP with Miller compensation
click here
Third party video tutorials
Many different video tutorials can be found on the Web about schematic entry and simulations with Cadence IC.
Very useful links might be:
http://vlsi.engr.uidaho.edu from vlsi.engr.uidaho.edu (by A. Kanago)
http://cmosedu.com/videos/cadence/cadence_videos.htm from CMOSedu.com (by J. Baker)